Brena 3-light LED pendant light, black Ø 22 cm Fabas

The Brena pendant light by Fabas brings a compact lighting composition above the table, recognisable by its suspended form and black finish. The 22 cm diameter gives the light fitting a defined presence suited to a single light point, above a dining table, breakfast bar or kitchen service area.

The 30 W LED light source is included and produces warm 2700 K light. The three lights help distribute illumination across the surface below, while the metal and borosilicate glass structure creates a clear contrast between the black fitting and the transparent glass. This combination works well with wooden tables, dark surfaces or furniture with clean lines, where the compact volume helps keep the view open.

An adjustable pendant light above the light point

Brena is installed on the ceiling and allows the pendant height to be adjusted from 25 to 200 cm. This lets you position the light in relation to the table height and the desired distance from the surface, keeping the light fitting in the most suitable position for everyday use. The power supply is 230V AC 50Hz.

The LED cannot be replaced, but the light can be dimmed with a step dimming system, so the intensity can be adjusted to suit different lighting needs. The included light source means you do not need to purchase a compatible bulb separately and makes the product ready for installation.

The Brena series also includes versions with diameters of 22, 25, 33 and 35 cm, with one, three or four lights, as well as cognac or transparent cognac finishes. This configuration has a black finish, a diameter of 22 cm and three 30 W LED lights.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

For a pendant light above a table, start with 70-80 cm between the surface and the lowest point of the fitting, then adjust the cable according to the ceiling height. This is an indoor light (IP20): do not install it in a bathroom near a bath or shower, or outdoors. Three LED bulbs with a maximum rating of 30 W and the correct fitting are required; choose bulbs that match in colour temperature (warm here) and power so the light points are consistent. The bulbs are included in the packaging. It is dimmable: dimmable bulbs and a compatible dimmer are required to adjust the intensity. Make the electrical connection with the power switched off; if you are unsure, contact a qualified installer.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Always clean the light when it is switched off and cool, with the power disconnected. For the glass, use a slightly damp microfibre cloth; if needed, apply detergent to the cloth, not to the diffuser. For the metal parts, a dry or slightly damp cloth is sufficient; do not use abrasive sponges or harsh detergents. When replacing a bulb, wait until the old one is cool and observe the stated maximum power.

Frequently asked questions

How do you install and adjust the Brena Fabas pendant light?

The pendant light is fixed to the ceiling and allows the pendant height to be adjusted from 25 to 200 cm, so you can position the light above the table or surface to be lit.

What light source does the Brena pendant light use?

It uses three integrated LED lights with a total power of 30 W. The light source is included, cannot be replaced and produces warm 2700 K light.

Which room can it be used in and what light does it produce?

It suits a dining table, breakfast bar or kitchen area. The warm 2700 K light provides illumination for social occasions and everyday use.