Handcrafted in Italy
Track Connectors by LuceArt. Joiners, corners and power feeds to build and extend lighting track layouts, with a wide choice of Ideal Lux and Maytoni accessories sold at retail with the aim of offering the best prices on the web. Everything you need to turn a straight line into a custom lighting path. LuceArt S.r.l. is based in Bellizzi (Salerno), has more than 50 years of experience in lighting and offers design support, tailored quotes and a B2B area for trade operators.
Track Connectors: Joiners, Corners and Power Feeds
Track connectors let you join, redirect and power lines of light, turning a simple length of track into a made-to-measure layout. Here you will find joiners, corners and power feeds from Ideal Lux and Maytoni, designed for use in dry indoor spaces.
Right System, Right Connector
The first check is the system: a connector only works with a track of the same series and type, for example single-phase, two-circuit or low-voltage magnetic. Products from different brands or lines are not interchangeable. Check the series name, colour and number of circuits on the product page before ordering.
Joiners, Corners and Power Points
A straight joiner extends a line, angled connectors (L, T or cross shaped) create corner layouts, and the power feed brings mains current to the track, at the end or at an intermediate point. Sketch the route first, count the joints, and place the power feed in a convenient position relative to the electrical supply point.
Installation, Finishes and Indoor Use
The connectors are IP20: use them indoors, in dry environments, and do not expose them to moisture or splashes. Pick the same finish as the track and modules for a uniform result. Installation must be carried out with the circuit disconnected from the mains, and we recommend a qualified electrician, especially for the power connections.
Look for the connector that suits your track and check compatibility on each product page. For layouts with many joints, or if you are unsure which system to choose, LuceArt support can help you set up the installation correctly.
FAQ: Track Connectors
Track Connectors: which types of connector are there and which one do I need?
Straight joiners extend a line, corner connectors let it change direction, and power feeds bring electricity to the track. Sketch your layout first, then count the straight sections, the corners and the feed point. The product page describes each connector's shape and use.
Track Connectors: can I use any connector with any track?
No. Connectors are designed for a specific track system and are generally not interchangeable between different series or brands. Before ordering, check the compatibility on the product page and match the connector to the exact track you own. If you are unsure, LuceArt support will help you choose.
Track Connectors: can I install connectors myself and where should I place the power feed?
Mechanical joining is simple, but any work on the electrical connection should be done with the power off at the main switch, and ideally by a qualified electrician. Place the power feed where the supply cable is easiest to reach, keeping the total load of the line within the limit stated for the track.
Track Connectors: what are the delivery times?
Times vary by product: items in stock ship the same day, while handmade items need longer production times. Each product page shows the latest estimated delivery date. We ship across Europe by insured express courier.
Track Connectors: who can buy and how does invoicing work?
Everyone: sales are at retail, with the aim of offering the best prices on the web. Trade operators (retailers, architects, interior designers, lighting designers and businesses) can also register for free in the dedicated B2B area. Invoices are issued by Luceart S.r.l. (VAT no. IT06336690653, Via dell'Artigianato 31, 84092 Bellizzi, Italy).
