Brena LED pendant light cognac Ø 33 cm Fabas

The Brena pendant light by Fabas combines a metal frame with a cognac-coloured borosilicate glass element. The 33 cm diameter creates a compact presence suited to lighting a dining table, kitchen worktop or central living-room area. The cognac finish brings a warm tone to the composition and pairs with wood, neutral surfaces and modern furniture.

The integrated 14 W LED emits 2700 K light and is included. The warm light supports spaces used for socialising and evening stays, while the pendant form focuses illumination on the surface below. The system is step-dimmable, so you can adjust the intensity to the time of day and how the room is used.

An adjustable pendant light for your lighting point

Brena is installed on the ceiling and has an adjustable height from 25 to 200 cm. The ceiling rose measures Ø 9 cm, keeping the upper part of the installation understated. The LED source cannot be replaced; the connection is intended for 230V AC 50Hz power supply. This product belongs to the Fabas Italian design range and provides precise decorative lighting above a table or work surface.

Within the Brena series, the colour, finish, diameter and number of lights vary. Alongside this 33 cm cognac version with one light, there are cognac or black configurations measuring 22, 25 and 35 cm, with one, three or four lights. The collection variants also use 10, 30 or 40 W sources and stated colour temperatures of 2700 K; this configuration has a 33 cm diameter, a cognac finish and a 14 W LED source.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

For a pendant light above a table, start with 70-80 cm between the surface and the lowest point of the lamp, then adjust the cable according to the ceiling height. This is an indoor light (IP20): do not install it in a bathroom near a bath or shower, or outdoors. The LED is integrated into the lamp body (1510 lm, 2700 K): there is no bulb to choose, as the light is set at the factory. It can be dimmed with a compatible dimmer: check the regulator type specified by the manufacturer. Installation must be carried out with the power disconnected and, if you are not experienced, by an electrician.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Carry out every task with the light switched off, cool and disconnected from the mains. For the glass, use a slightly damp microfibre cloth; if needed, apply cleaner to the cloth, not to the diffuser. For the metal parts, use a dry or slightly damp cloth, without abrasive sponges or harsh cleaners. The LED source is integrated and cannot be replaced like a bulb: in the event of a fault, contact the manufacturer's support service.

Frequently asked questions

How is the Fabas Brena pendant light installed?

The pendant light is fixed to the ceiling and has an adjustable height from 25 to 200 cm. The ceiling rose measures Ø 9 cm.

What light source does the Brena pendant light use?

It uses an included integrated 14 W LED with 2700 K light. The source cannot be replaced and is step-dimmable.

Where does it work well, and what kind of light does it provide?

The 33 cm diameter suits it to a dining table, peninsula or worktop. The 2700 K light is warm and suitable for spaces used for socialising.