Wall light Snap LED matte white 16 cm 1930 lm Fabas

Snap by Fabas is a wall light with a metal and methacrylate structure, offering a slim and tidy lighting presence. The matte white finish complements the compact body, which is 16 cm wide, 3.7 cm high and 12 cm deep. The profile sits close to the wall and suits minimalist arrangements where the light should remain discreet.

The integrated 18 W LED produces 1930 lm with a colour temperature of 2700 K: warm light suitable for living rooms, bedrooms, hallways and corridors, both as functional lighting and as additional light near a mirror, console table or passageway. The compact proportions also allow the wall light to be placed on walls where available space is limited.

Installation and light control

Snap is fixed to the wall and includes an integrated LED light source. The LED cannot be replaced, while the fitting is dimmable with phase-cut control: when connected to a compatible controller, it allows you to adjust the brightness to suit how the room is used. The specified power supply is 230 V AC 50 Hz.

The white colour distinguishes this configuration from the other Snap series options, which include black, sand and corten versions, as well as models with different widths and different power and light output levels. The 16 cm version keeps a compact size and 1930 lm output, with the same 2700 K colour temperature as comparable configurations in the collection.

Fabas Italian design makes Snap suitable for pairing with light-coloured walls, furniture with clean lines and matt finishes. In a bedroom it can be used as a side light, while in a hallway or along a corridor it defines the route with an integrated light source and a compact projection.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Wall lights are generally installed 160-180 cm above the floor; placed in pairs at the sides of a mirror, they provide even light on the face. The IP20 protection rating makes it suitable for dry indoor areas. The LED light source is integrated: 1930 lumens at 2700 K, so no bulbs are required, and it is switched on from the wall switch. It is dimmable with a compatible dimmer: check the type of controller specified by the manufacturer. Carry out the electrical connection with the power switched off; if you are unsure, contact a qualified installer.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Always clean the lamp when it is switched off and cool, with the power disconnected. Dust the metal with a dry cloth; avoid acidic or abrasive products that could damage the finish. Clean the plastic or acrylic parts with a damp cloth and mild soap: do not use alcohol or solvents, as they can make them cloudy. The LED source is integrated and cannot be replaced like a bulb: in the event of a fault, contact the manufacturer’s service department.

Frequently asked questions

How do you install the Snap Fabas wall light?

Snap is installed on the wall. Its dimensions are 16 cm wide, 3.7 cm high and 12 cm deep; the specified electrical connection is 230 V AC 50 Hz.

What light source does the Snap wall light use?

It uses an integrated 18 W LED, included with the light and not replaceable. The light source is dimmable with phase-cut control and produces 1930 lm at 2700 K.

Which room is it suitable for, and what type of light does it provide?

The warm 2700 K light suits living rooms, bedrooms, hallways and corridors. The 16 cm width also works on walls with limited space.