Andromeda outdoor wall light 2-light anthracite 45 cm Ideal Lux

The Andromeda wall light by Ideal Lux provides functional, discreet lighting for outdoor spaces. Its anthracite finish enhances the compact shape and pairs easily with façades, entrances, terraces and passageways with modern furnishings.

The painted die-cast aluminium body houses two diffusers, one at the top and one at the bottom, made from satin-finished Pyrex glass. This configuration produces direct and indirect light, distributing illumination upwards and downwards across the wall. It helps light an entrance, define a route or illuminate an outdoor area while maintaining a neat composition.

Andromeda AP2 uses two bulbs with E27 caps, up to 60 W each. Choosing the light source lets you adjust the lighting result to the setting and atmosphere you want while keeping the wall light’s clean character. Bulbs are not included.

With a width of 45 cm, height of 8 cm and depth of 9.5 cm, this model has compact proportions and a well-distributed luminous surface. The IP55 protection rating supports outdoor use, while the anthracite finish pairs well with light walls, textured coverings and contemporary architectural details.

• Two light points with E27 cap
• Direct and indirect light distribution
• Anthracite finish and satin diffusers

Usage advice

Wall lights are generally installed 160-180 cm above the floor; placed in pairs beside a mirror, they provide even light on the face. With an IP55 protection rating, this light suits humid areas such as bathrooms or sheltered outdoor locations, away from direct water jets. Fit 2 bulbs with E27 caps, up to 60 W each: using LED bulbs with the same colour temperature gives an even result. Bulbs are not included and must be purchased separately. It is not dimmable: the brightness depends on the fitted bulbs. Disconnect the power supply before installation; if you are unsure about the connection, ask an electrician to handle it.

Cleaning and maintenance

Before cleaning, switch off the lamp, isolate the electrical supply and allow the surfaces to cool. Dust the metal with a dry cloth; avoid acidic or abrasive products that could damage the finish. To change a bulb, wait until it has cooled and do not exceed the maximum wattage shown on the label.

Frequently asked questions

What are the dimensions of the Andromeda wall light?

The wall light is 45 cm wide, 8 cm high and 9.5 cm deep. Before installation, check the available wall space and the position of the electrical connections.

Which bulbs does the Andromeda wall light use?

It uses two bulbs with E27 caps, up to 60 W each. Bulbs are not included; choosing the light source lets you set the lighting result according to the area to be illuminated.

Where should the Andromeda wall light be installed, and what light does it produce?

It suits exterior walls, entrances, terraces and passageways. The two diffusers, one upper and one lower, create direct and indirect light directed upwards and downwards.