Black 10 cm outdoor wall light Cincinnati SearchLight

The Cincinnati outdoor wall light by SearchLight combines a black-finish frame with clear ribbed glass panels, creating a useful light point for entrances, passageways and exterior walls. Its vertical shape enhances the surface without making it feel heavy, providing a neat presence beside a door, along a walkway or near an access area.

The ribbed glass helps diffuse the bulb’s light and makes the surrounding area easier to see while retaining a defined lighting effect. The wall light uses one E27 bulb rated up to 60 W, allowing you to choose the most suitable light source, including compatible LED bulbs. The light can therefore be adjusted to suit the desired atmosphere and level of visibility.

A compact solution for walls and entrances

With a width of 10 cm and a height of 28 cm, Cincinnati has a vertical profile and takes up little wall space. It provides practical lighting for a home entrance, porch, veranda or outdoor paths, especially when several coordinated light points are needed along a façade. The IP44 rating permits use in exterior settings compatible with this level of protection.

The black finish works with modern façades, masonry walls and pared-back architectural settings. Clear ribbed glass adds a subtle material detail, while light directed outwards improves orientation near entrances without requiring a bulky fitting. The bulb is not included, so you can purchase the light source separately according to your preferences.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Wall lights are normally installed at 160-180 cm above the floor; placed in pairs on either side of a mirror, they provide even light on the face. With an IP44 rating, this fitting suits humid areas such as bathrooms or sheltered outdoor locations, away from direct water jets. It takes an E27 bulb up to 60 W: an LED bulb provides good light with low energy use. Isolate the electrical supply before installation; if you are unsure about the connection, ask an electrician to complete it.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Before cleaning, switch off the light, isolate the power supply and allow the surfaces to cool. For routine cleaning, use a soft, dry or slightly damp cloth, without abrasive products. To replace a bulb, wait until it has cooled and do not exceed the maximum power shown on the label.

Frequently asked questions

What are the dimensions of the Cincinnati SearchLight wall light?

The wall light is 10 cm wide and 28 cm high. Before installation, check the available wall space and the position of the light point.

Which bulb does this outdoor wall light require?

Cincinnati uses 1 bulb with an E27 fitting, up to 60 W. It is also compatible with E27 LED bulbs; the bulb must be purchased separately.

Where can it be installed and what type of light does it provide?

It is suitable for entrances, porches, verandas, walkways and exterior walls compatible with IP44. The clear ribbed glass diffuses the light and helps make the nearby area more visible.