TOWER outdoor bollard rust-corten 90 cm E27 Perenz

The Perenz Tower bollard provides outdoor lighting for entrances, paths, garden edges and routes around the home. Its compact vertical shape creates neat points of light along a passage, with a discreet yet recognisable presence. The rust-corten finish adds a textured tone and pairs easily with paving, stone, wood and furniture in natural colours.

The frame is made from powder-coated metal and aluminium, while the satin acrylic diffuser helps shield the light source and distribute light more evenly. The product uses a replaceable E27 bulb compatible with LED bulbs, with a maximum power of 20 W per bulb. This configuration lets you choose the light source that suits the desired lighting effect while retaining the practicality of an interchangeable bulb.

A vertical light point for gardens and paths

With its stated format of 8 x 8 cm and height of 90 cm, Tower extends vertically without taking up much ground space. It can mark a route visually, light the approach to a door or define the edge of an outdoor area. The IP54 protection rating suits outdoor use where the product may be exposed to dust and water splashes.

The corten finish works well with contemporary, rustic and natural settings, especially when echoed in gates, pots, cladding or architectural details. The Tower collection lets you create a coordinated sequence of light points, maintaining continuity in the shape and visual effect of the installation.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

outdoors, choose the position along paths and near entrances, where the light is genuinely useful. With protection rating 54, it suits damp areas such as bathrooms or sheltered outdoor locations, away from direct water jets. Fit an E27 bulb, up to a maximum of 20 W per bulb: an LED bulb gives good light while using little energy. Installation must be carried out with the power switched off and, if you are inexperienced, by an electrician.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Always work with the light switched off, cool and disconnected from the mains. Dust the metal with a dry cloth; avoid acidic or abrasive products that could damage the finish. Before changing a bulb, wait until it has cooled and do not exceed the maximum wattage shown on the label.

Frequently asked questions

What are the dimensions of the Perenz Tower bollard?

The bollard has a stated format of 8 x 8 cm and a height of 90 cm. Before installation, also allow for the space required for mounting and electrical connection.

Which bulb does the Tower bollard use and what wattage can it have?

Tower uses a replaceable E27 bulb compatible with LED bulbs. The maximum permitted power is 20 W per bulb.

Where can it be used and what protection does it offer?

It suits paths, entrances, gardens and outdoor routes. The IP54 protection rating suits locations exposed to dust and water splashes.